Large volume subcutaneous delivery using multi-orifice jet injection.

Needle-free jet injection is an alternative drug delivery technique that uses the liquid drug itself to penetrate through the skin. This technology is not only a promising alternative to hypodermic needles but also has the potential to replace intravenous delivery with rapid, needle-free subcutaneous delivery for large-volume treatments. In this work we propose a parallelised, 'multi-orifice' approach to overcome the volume constraints of subcutaneous tissue. We present a prototype multi-orifice nozzle with up to seven orifices and use this nozzle to perform injections into samples of ex vivo porcine tissue. These injections demonstrated the rapid (<0.15 s) delivery of up to 2 mL into the tissue using both three and seven orifices. Delivery success (measured as the percentage of fluid deposited in the tissue relative to the total volume that left the device) was very similar when using three versus seven injection orifices. A computational fluid dynamic model of multi-orifice jet injection is also presented. This model predicts that jet production is largely unaffected as the spacing between orifices is changed from 3 mm to 48 mm. This finding is supported by measurements of the speed, volume, and shape of the jets produced by the prototype nozzle that showed very similar jets were produced through all seven orifices. These findings demonstrate the feasibility of multi-orifice jet injection for needle-free delivery of large volumes. This promising technique has the potential to improve patient experience and reduce healthcare costs in large volume parenteral delivery applications.

Home-Use Hyaluronic Acid Jet Injectors: Unreliable and Unsafe.

BACKGROUND: Needle-free hyaluronic acid (HA) jet injectors are gaining popularity for rejuvenation treatment. The devices are widely available online and are used for self-injection or in beauty salons by nonphysicians. However, little is known about their performance and safety. OBJECTIVE: To explore the injection efficiency and cutaneous biodistribution patterns administered with home-use compared with medical jet injectors and to assess safety aspects. MATERIALS AND METHODS: The authors injected HA into ex vivo human skin with 4 home-use and 2 medical injectors. The intracutaneous dose of HA was calculated, and the cutaneous biodistribution of HA was assessed using a 3-dimensional Fluorescent Imaging Cryomicrotome System (3D-FICS). Safety aspects were evaluated based on the presence of a manual, CE (conformité européenne) mark, and sterility. RESULTS: The intracutaneous dose delivered by the home-use injectors was markedly lower compared with the medical injectors. 3D imaging for home-use injectors showed superficial epidermal distribution with low distribution volumes. For medical injectors, volumes were substantially larger and mainly middermal. All evaluated safety aspects were lacking. CONCLUSION: Results of this study suggest that the specific combinations of home-use injectors and HA used in this study are unreliable and unsafe, which casts doubts on the performance of these treatments in general.

Rotatable Orifice for Needle-Free Jet Injection.

This research explores a new development in orifice technology for needle-free jet injection. The premise lies in the ability to control the angle at which the drug is delivered into the tissue to increase the lateral dispersion of the drug. Towards this aim, a spherical orifice that can rotate to adjust the injection angle is explored. This work tests the design and feasibility of the spherical orifice, its housing, and the orifice seats. The results show that the most successful way to create a fluid seal within the housing was to use an o-ring to create a fluid seal at the inlet side of the sphere and an extended brass seat on the outlet side of the sphere. This allowed jet speeds up to approximately 123 m/s through a 0.2 mm orifice machined into 9.5 mm diameter brass sphere. Jet speeds large enough to penetrate porcine tissue were reached at jet angles of 0° to 50° relative to the base of the injector. Although the jets successfully penetrated the tissue, the amount of fluid delivered varied depending on the injection angle. With a shallow angle injection, the fluid retention rate (the percentage of the ejected fluid from the injector which the tissue sample retained) was on average 44%. When the spherical orifice was at its maximum angle, the injection achieved an average fluid retention rate of 22%. At its widest angle, lateral dispersion of the drug also increased by approximately 40%, in comparison to conventional needles and traditional perpendicular jet injection. In summary, a spherical orifice needle-free injection system successfully produced high-speed jets and delivered liquid into porcine tissue at injection angles from 0° to 50°, demonstrating the feasibility of this technique that offers unique advantages over typical orifice plates and conventional needles.Clinical Relevance-A rotatable nozzle can be used to control the angle of needle-free drug delivery.

Measurement of Blood Dilution during Lancet-Free Blood Sampling.

In this paper, we report on a fluorescent and colorimetric system for measuring the dilution of capillary blood released by a needle-free jet injector. Jet injection uses a high-speed liquid jet to penetrate tissue, and in the process can release capillary blood that can be collected for performing blood tests. In this way, blood sampling can be performed without the use of a lancet. However, any injectate that mixes with the collected blood dilutes the sample and may significantly impact subsequent analyses. By adding the fluorescent marker indocyanine green to the injected liquid, the fraction of injectate mixed into the collected blood can be measured. The incorporation of colorimetry allows our system to also correct for the impact of hematocrit on fluorescence. The results from this system show that it can determine the dilution of blood that has been diluted by up to 10 %, the upper limit of dilution typically observed in lancet-free blood sampling via jet injection.Clinical Relevance- Blood samples can be collected by jet injection without significant dilution, avoiding the need for lancing.

Drug injection and dispersion characteristics of an air-powered needle-free injector.

The present study aims to reveal the operational characteristics of the needle-free injector. Effects of operating parameters on the injection performance were experimentally investigated. A visualization experiment was performed to describe the dispersion pattern of water in gel. The results show that the peak stagnation pressure increases continuously with the driving pressure. The injection process comprises two distinct stages, which are characterized by the penetration and the dispersion of the drug, respectively. The nozzle diameter imposes a significant effect on the penetration ability of the needle-free injector. As the nozzle diameter increases, the stagnation pressure decreases nearly linearly and the injection duration is considerably shortened, but the jet power is increased. Among the three nozzle diameters investigated, the nozzle diameter of 0.25 mm satisfies the proposed criterion of the injection power. It is evidenced through the visualization experiment that the maximum penetration depth increases with the nozzle diameter. The width of the projection area of the water bulk is insensitive to the nozzle diameter. For a certain nozzle diameter, the projection area of the diffused water bulk increases linearly with increasing liquid volume.

A Comparison in Patient Comfort Using Conventional Syringe and Needleless Jet Anesthesia Technique in Periodontal Surgery-A Split-Mouth Randomized Clinical Trial.

Background and Objectives: Periodontal surgery requires local anesthetic coverage to alleviate patient discomfort. Needles and injections can engender feelings of fear and anxiety in individuals. This study aimed to assess the level of comfort and anxiety in patients during the administration of local anesthesia using needleless jet anesthesia (JA) when compared to a conventional syringe (CS) in periodontal surgery. Method and Materials: 60 sites were designated for injection in a split-mouth design in 30 subjects who required periodontal surgery. Local anesthesia was administered in two appointments scheduled one week apart using either a JA system or a CS. The Visual Analogue Scale (VAS), Verbal Rating Scale (VRS), and Beck's anxiety inventory were used to report the pain and anxiety levels while injecting local anesthesia. Statistical analysis of the results was performed using the Shapiro-Wilks test and Paired t-test. Results: Patients reported greater comfort with JA. The VAS and VRS values were statistically significant-(p = 0.003) and (p = 0.001), respectively. Patients showed fear and were nervous about receiving a local anesthetic using a CS. A few subjects experienced lingering pain with the CS, whereas greater comfort and no lingering soreness were reported post-operatively at the site of JA administration. Conclusions: This study provides the first comprehensive assessment of using JA for periodontal surgical procedures. Lower pain scores were consistently observed with the use of jet injectors. Patients were at ease and reported lesser anxiety and greater comfort with jet injectors, making it ideally suited for providing local anesthesia in periodontal surgery.

Jet injectors: Perspectives for small volume delivery with lasers.

Needle-free jet injectors have been proposed as an alternative to injections with hypodermic needles. Currently, a handful of commercial needle-free jet injectors already exist. However, these injectors are designed for specific injections, typically limited to large injection volumes into the deeper layers beneath the skin. There is growing evidence of advantages when delivering small volumes into the superficial skin layers, namely the epidermis and dermis. Injections such as vaccines and insulin would benefit from delivery into these superficial layers. Furthermore, the same technology for small volume needle-free injections can serve (medical) tattooing as well as other personalized medicine treatments. The research dedicated to needle-free jet injectors actuated by laser energy has increased in the last decade. In this case, the absorption of the optical energy by the liquid results in an explosively growing bubble. This bubble displaces the rest of the liquid, resulting in a fast microfluidic jet which can penetrate the skin. This technique allows for precise control over volumes (pL to µL) and penetration depths (µm to mm). Furthermore, these injections can be tuned without changing the device, by varying parameters such as laser power, beam diameter and filling level of the liquid container. Despite the published research on the working principles and capabilities of individual laser-actuated jet injectors, a thorough overview encompassing all of them is lacking. In this perspective, we will discuss the current status of laser-based jet injectors and contrast their advantages and limitations, as well as their potential and challenges.

Dispersion profile of a needle-free jet injection depends on the interfacial property of the medium.

Injections into or through the skin are common drug or vaccine administration routes, which can be achieved with conventional needles, microneedles, or needle-free jet injections (NFJI). Understanding the transport mechanism of these injected fluids is critical for the development of effective drug administration devices. NFJI devices are distinct from traditional injection techniques by their route and time scale, which relies on a propelled microjet with sufficient energy to penetrate the skin surface and deliver the drug into the targeted region. The injected fluid interacts with multiple skin tissue layers and interfaces, which implies that the corresponding injection profile is dependent on their mechanical properties. In this study, we address the lack of fundamental knowledge on the impact of these interfaces on the injection profiles of NFJI devices.

Effect of X-ray free-electron laser-induced shockwaves on haemoglobin microcrystals delivered in a liquid jet.

X-ray free-electron lasers (XFELs) enable obtaining novel insights in structural biology. The recently available MHz repetition rate XFELs allow full data sets to be collected in shorter time and can also decrease sample consumption. However, the microsecond spacing of MHz XFEL pulses raises new challenges, including possible sample damage induced by shock waves that are launched by preceding pulses in the sample-carrying jet. We explored this matter with an X-ray-pump/X-ray-probe experiment employing haemoglobin microcrystals transported via a liquid jet into the XFEL beam. Diffraction data were collected using a shock-wave-free single-pulse scheme as well as the dual-pulse pump-probe scheme. The latter, relative to the former, reveals significant degradation of crystal hit rate, diffraction resolution and data quality. Crystal structures extracted from the two data sets also differ. Since our pump-probe attributes were chosen to emulate EuXFEL operation at its 4.5 MHz maximum pulse rate, this prompts concern about such data collection.

Subcutaneous nicotine delivery via needle-free jet injection: A porcine model.

Subcutaneous delivery of nicotine was performed using a novel electrically-operated needle-free jet injector, and compared to hypodermic needle delivery in a porcine model. Nicotine was delivered as a single, one-milligram dose into the abdominal skin, formulated as a 50 microliter aqueous solution. Plasma levels of nicotine and cotinine, its main metabolite, were then monitored over 2 h, following which the injection site was excised for histological examination. No irritation or tissue damage were found at the injection sites, and the jet-injected nicotine exhibited comparable absorption into the systemic circulation to that injected using a conventional needle and syringe. The needle-free jet injection of nicotine is a promising and well tolerated method. The data presented from this porcine model will support a first in human trial towards a new promising nicotine replacement therapy.

Characterization of jet injection efficiency with mouse cadavers.

Needle-free drug delivery is highly sought after for reduction in sharps waste, prevention of needle-stick injuries, and potential for improved drug dispersion and uptake. Whilst there is a wealth of literature on the array of different delivery methods, jet injection is proposed as the sole candidate for delivery of viscous fluids, which is especially relevant with the advent of DNA-based vaccines. The focus of this study was therefore to assess the role of viscosity and jet configuration (i.e. stand-off relative to the skin) upon injection efficiency for a fixed spring-loaded system (Bioject ID Pen). We performed this assessment in the context of mouse cadavers and found that the dominant factor in determining success rates was the time from euthanasia, which was taken as a proxy for the stiffness of the underlying tissue. For overall injection efficiency, ANOVA tests indicated that stiffness was highly significant (P <  < 0.001), stand-off was moderately significant (P < 0.1), and viscosity was insignificant. In contrast, both viscosity and standoff were found to be significant (P < 0.01) when evaluating the percentage delivered intradermally. Using high-resolution micro-computed tomography (µ-CT), we also determined the depth and overall dispersion pattern immediately after injection.

Viscous Heating Assists Jet Formation During Needle-Free Jet Injection of Viscous Drugs.

OBJECTIVE: Jet injectors use a high-pressure liquid jet to pierce the skin and deliver drug into underlying tissues. This jet is formed through a short, narrow orifice; the geometry of the orifice and the properties of the fluid affect the nature of the flow. We aimed to discover information about the turbulent and viscous processes that contribute to pressure loss and flow patterns during jet injection. METHODS: We used computational fluid dynamics methods and experimental observation to investigate the effects of nozzle geometry, fluid viscosity, and viscous heating on jet production. We experimentally verified the temperature change of the jet during ejection, using an infrared camera. RESULTS: Our models accurately predict the average jet speed produced for two example nozzle geometries over two orders of magnitude of viscosity. The models reveal the previously unreported importance of viscous heating in the formation of the jet. Temperatures >65 °C were predicted at the edge of the flow as a result of viscous heating. These caused a significant local reduction in viscosity and effectively allowed the fluid to lubricate itself. Our experiments confirmed changes in mean jet temperature of up to 2.5 °C, which are similar to those predicted by our model (∼2.8 °C). CONCLUSION: These results reveal the importance of the viscous heating properties of a fluid in the formation of high-speed jets for drug delivery. SIGNIFICANCE: This property is crucial to consider when formulating new drugs for needle-free jet injection.

Assessment of anesthetic properties and pain during needleless jet injection anesthesia: a randomized clinical trial.

OBJECTIVE: Pain due to administration of local anesthetics is the primary reason for patients' fear and anxiety, and various methods are used to minimize it. This study aimed to measure the degree of pain during administration of anesthesia and determine the latency time and duration of pulpal anesthesia using two anesthetic methods in the maxilla. MATERIALS AND METHODS: A randomized, single-blind, split-mouth clinical trial was conducted with 41 volunteers who required class I restorations in the maxillary first molars. Local anesthesia was administered with a needleless jet injection system (experimental group) or with a carpule syringe (control) using a 30-gauge short needle. The method of anesthesia and laterality of the maxilla were randomized. A pulp electric tester measured the latency time and duration of anesthesia in the second molar. Visual analogue scale (VAS) was used to measure the degree of pain during the anesthetic method. Data were tabulated and then analyzed by a statistician. The t-test was used to analyze the differences between the groups for basal electrical stimulation. Duration of anesthesia and degree of pain were compared using the Mann-Whitney test. A 5% significance level was considered. RESULTS: There was no statistical difference in the basal electrical stimulation threshold (mA) and degree of pain between the two methods of anesthesia (p>0.05). Latency time was 2 minutes for all subjects. The duration of pulpal anesthesia showed no statistical difference (minutes) between the two methods (p<0.001), with a longer duration for the traditional method of anesthesia (median of 40 minutes). CONCLUSIONS: The two anesthetics methods did not differ concerning the pain experienced during anesthesia. Latency lasted 2 minutes for all subjects; the traditional infiltration anesthesia resulted in a longer anesthetic duration compared with the needleless jet injection.

Needle-free jet versus conventional needle injection for local anesthesia in men undergoing surgical sperm retrieval.

BACKGROUND: Surgical sperm retrieval, requiring local anesthetic injection, is the most frequent surgical procedure in male infertility. However, needle phobia is common and may contribute to negative experiences or refusal of procedures employing needle injection. OBJECTIVES: The aim of this study was to compare the acceptability, safety, and efficacy of needle-free jet anesthetic technique (MadaJet) with conventional needle injection for surgical sperm retrievals in patients with azoospermia. MATERIALS AND METHODS: This single-blind randomized controlled trial (RCT) was included of 59 participants who underwent surgical sperm retrievals. Patients were randomly assigned to the needle-free jet (n = 29) or needle injection (n = 30) groups prior to undergoing the surgery. The primary endpoint was the pain score. RESULTS: Baseline characteristics were comparable between the two groups. The safety and adverse outcomes were also not statistically significant difference (p > 0.05). The pain score in patients using needle-free jet was significantly lower than that in patients using needle injection (p < 0.05). Patients in MadaJet group had a significantly lower discomfort score during (p < 0.001) and after (p = 0.01) injection than those in the needle injection group. However, there was no significant difference in the fear score (before, during, and after) of MadaJet and needle injection (p = 0.98, p = 0.74, and p = 0.94, respectively). The mean time to onset of anesthesia was much shorter in the MadaJet group as compared with needle injection (10 ± 4 vs. 157.5 ± 71 s, p < 0.001). However, the duration of anesthesia in patients using MadaJet was shorter compared with those using needle injection (44 ± 13 vs. 63 ± 26 min, p < 0.001). CONCLUSION: In conclusion, for local anesthesia in patients undergoing surgical sperm retrieval, MadaJet produces less pain and discomfort with quicker time to onset and offset of anesthesia compared with conventional needle injection.

Assessment of anesthetic properties and pain during needleless jet injection anesthesia: a randomized clinical trial

Abstract Pain due to administration of local anesthetics is the primary reason for patients' fear and anxiety, and various methods are used to minimize it. This study aimed to measure the degree of pain during administration of anesthesia and determine the latency time and duration of pulpal anesthesia using two anesthetic methods in the maxilla. Materials and Methods: A randomized, single-blind, split-mouth clinical trial was conducted with 41 volunteers who required class I restorations in the maxillary first molars. Local anesthesia was administered with a needleless jet injection system (experimental group) or with a carpule syringe (control) using a 30-gauge short needle. The method of anesthesia and laterality of the maxilla were randomized. A pulp electric tester measured the latency time and duration of anesthesia in the second molar. Visual analogue scale (VAS) was used to measure the degree of pain during the anesthetic method. Data were tabulated and then analyzed by a statistician. The t-test was used to analyze the differences between the groups for basal electrical stimulation. Duration of anesthesia and degree of pain were compared using the Mann-Whitney test. A 5% significance level was considered. Results: There was no statistical difference in the basal electrical stimulation threshold (mA) and degree of pain between the two methods of anesthesia (p>0.05). Latency time was 2 minutes for all subjects. The duration of pulpal anesthesia showed no statistical difference (minutes) between the two methods (p<0.001), with a longer duration for the traditional method of anesthesia (median of 40 minutes). Conclusions: The two anesthetics methods did not differ concerning the pain experienced during anesthesia. Latency lasted 2 minutes for all subjects; the traditional infiltration anesthesia resulted in a longer anesthetic duration compared with the needleless jet injection.

Feasibility of jet injector use during inactivated poliovirus vaccine house-to-house vaccination campaigns.

BACKGROUND: To attain high coverage during polio vaccination campaigns, an outreach house-to-house strategy is used to administer oral poliovirus vaccine. Administering an injectable vaccine house-to-house requires a skilled work force and increases risks of needle stick injuries. Needle-free injection devices provide a safer alternative to needles and syringes for administering injectable vaccines. We evaluated the feasibility and acceptability of a needle-free injection device to administer injectable poliovirus vaccine during a house-to-house vaccination outreach activity. METHODS: Vaccination teams administered injectable poliovirus vaccine using the Pharmajet® needle-free intramuscular jet injector to children ages 6-59 months in 766 homes. Data on the feasibility of using the jet injector in an outreach campaign setting and the acceptability of the jet injector by caregivers and vaccinators were collected. RESULTS: A total of 993 injections were administered. Vaccinators faced challenges during device preparation in 16% (n = 158) of injections; challenges were related to problems loading the injector and not having a flat surface to use for setup of the injector. Among 32 vaccinators interviewed after the vaccination campaign, the main reported advantage of the device was absence of sharps disposal (91%) while the main reported disadvantage was unacceptability by parents (90%) which was related to the vaccine, not the device. CONCLUSIONS: The needle-free jet injector was feasible for use in house-to-house campaigns. Acceptability by vaccinators was low as 81% stated that the jet injector was not easier to use than needle and syringe. Parental refusal related to frequent polio vaccination campaigns was the biggest challenge. In addition, novelty of the device posed a challenge to teams as they needed to reassure parents about safety of the device. To take full advantage of the ability to take injectable vaccines door-to-door during vaccination campaigns using a needle-free jet injector device, tailored social mobilization efforts are needed ahead of campaigns.

Immunogenicity and safety of measles-mumps-rubella vaccine delivered by disposable-syringe jet injector in India: A randomized, parallel group, non-inferiority trial.

BACKGROUND: We conducted a randomized, non-inferiority, clinical study of MMR vaccine by a disposable-syringe jet injector (DSJI) in toddlers in India in comparison with the conventional administration. METHODS: MMR vaccine was administered subcutaneously by DSJI or needle-syringe (N-S) to toddlers (15-18 months) who had received a measles vaccine at 9 months. Seropositivity to measles, mumps, and rubella serum IgG antibodies was assessed 35 days after vaccination. Non-inferiority was concluded if the upper limit of the 95% CI for the difference in the percent of seropositive between groups was less than 10%. Solicited reactions were collected for 14 days after vaccination by using structured diaries. RESULTS: In each study group, 170 subjects received MMR vaccine. On day 35, seropositivity for measles was 97.5% [95% CI (93.8%, 99.3%)] in the DSJI group and 98.7% [95% CI (95.5%, 99.8%)] in the N-S group; for mumps, 98.8% [95% CI (95.6%, 99.8%)] and 98.7% [95% CI (95.5%, 99.8%)]; and for rubella, 98.8% [95% CI (95.6%, 99.8%)] and 100% [95% CI (97.7%, 100.0%)]; none of the differences were significant. The day 35 post-vaccination GMTs in DSJI and N-S groups were measles: 5.48 IU/ml [95% CI (3.71, 8.11)] and 5.94 IU/ml [95% CI (3.92, 9.01)], mumps: 3.83 ISR [95% CI (3.53, 4.14)] and 3.66 ISR [95% CI (3.39, 3.95)] and rubella: 95.27 IU/ml [95% CI (70.39, 128.95)] and 107.06 IU/ml [95% CI (79.02, 145.06)]; none of the differences were significant. The DSJI group reported 173 solicited local reactions and the N-S group reported 112; most were mild grade. Of the total of 156 solicited systemic adverse events, most were mild, and incidence between the two groups was similar. CONCLUSIONS: MMR vaccination via DSJI is as immunogenic as vaccination by N-S. Safety profile of DSJI method is similar to N-S except for injection site reactions which are more with DSJI and are well-tolerated. Registration US National Institutes of Health clinical trials identifier - NCT02253407. Clinical trial registry of India identifier - CTRI/2013/05/003702.

Comparison of jet injector and insulin pen in controlling plasma glucose and insulin concentrations in type 2 diabetic patients.

This study is conducted to investigate efficacy of an insulin jet injector and an insulin pen in treatment of type 2 diabetic patients. Sixty patients with type 2 diabetes were treated with rapid-acting insulin (regular insulin) and insulin analog (insulin aspart) using the jet injector and the pen in 4 successive test cycles. Postprandial glucose and insulin concentrations in blood were measured over time. Areas under curves of glucose and the insulin were calculated, and efficacy of 2 injection methods in treatment of the diabetes was compared. Regular insulin and insulin aspart administration by the jet injector showed significant decreases in plasma glucose levels as compared to the pen injection (P < 0.05). Postprandial plasma glucose excursions at the time points of 0.5 to 3 hours were obviously lower in the jet-treated patients than the pen-treated ones (P < 0.05). Postprandial plasma insulin levels were markedly higher in the jet-treated patients than the pen-treated ones (P < 0.05). Area under the glucose curve in the pen-treated patients was significantly increased as compared to the jet-treated ones (P < 0.01). Efficacy of the insulin jet injector in treatment of type 2 diabetic patients is obviously superior to the insulin pen in regulating plasma glucose and insulin levels.

Transcutaneous pneumatic injection of glucose solution: a morphometric evaluation of in vivo micropig skin and tissue-mimicking phantom.

BACKGROUND: Needle-free, transcutaneous pneumatic injection systems can be used to deliver therapeutic solutions to targeted layers of skin in a minimally invasive manner. METHODS: To evaluate jet infiltration patterns and tissue reactions, 5% isotonic and 20% hypertonic glucose solutions were pneumatically injected into in vivo micropig skin. Gelatin TM phantom was additionally prepared to analyze penetration and dispersion patterns for different experimental settings. RESULTS: As immediate tissue reactions in the in vivo micropig skin, distinct pneumatic injection injury zones (PIIZs) in the dermis, extending from the papillary dermis deep into the dermo-subcutaneous junction, were generated with the 5% and 20% glucose solutions and with pneumatic pressures of 4.64 and 5.7 bars, respectively. PIIZs markedly decreased in appearance at 1 day after treatment, accompanied by inflammatory cell infiltration, and disappeared at 7 days post-treatment with increased collagen and elastin production. In TM phantom study, the PIIZs created by 20% glucose mainly comprised a single, homogenous, round to oval zone, whereas those created by 5% glucose were irregular and multi-lobular. CONCLUSION: The present study suggests that transcutaneous pneumatic injection therapy may exert mechanical stimulatory effects, immediate tissue shrinkage via hypertonic solutions, and late tissue regeneration effects during wound healing.